Gracias por su visita
Esta máquina se vendió recientemente. Mire otras opciones similares o contáctenos directamente.
AMADA - F0-4020NTDE-LAS-AMA-2005-00001
¿Tiene más preguntas? ¡Contáctenos!
José María García
+34 601 158 008
j.garcia@gindumac.com
- GINDUMAC
- Productos
- Máquinas para chapa
- Used CO2 Laser Cutting Machine AMADA F0-4020NT (2005) for sale | GINDUMAC.COM
This AMADA F0-4020NT CO2 Laser Cutting Machine was manufactured in 2005 in Japan. It is equipped with a 4 kW CO2 laser (FANUC, AF4000E). The axis travel range is: X = 4420mm, Y = 2050mm and Z = 200mm. This machine can operated with a max. worksheet weight (stand alone machine and with LST) of both 1570 kg. It is no longer under power, but all maintenance has been carried out annually and the machine is technically in perfect condition. Recently it has been professionally dismantled and is ready for dispatch. In total machine hours are at 37500. 5 inch and 7.5 inch lens holders are included. See photo gallery for more details. In addition, you will find a summary of all maintenance reports attached as PDF (German). Contact us anytime for further questions!
Resumen
- marca: AMADA
- año: 2005
- MODELO: F0-4020NT
- horas de producción: 37500
- tipo de aplicación: Corte
- Ubicación: Alemania
- tipo de máquina: Máquina de corte láser CO2
- Marca de unidad de control: AMADA
Información técnica - AMADA F0-4020NT
Unidad de Control
- Marca del control: AMADA
Recorrido
- Recorrido eje X: 4420 mm
- Recorrido eje Y: 2050 mm
- Recorrido eje Z: 200 mm
Información adicional
Additional equipment
- 5 inch and 7.5 inch lens holders included (5 inch lens is in the machine and the 7.5 inch is stored)
Machine Benefits
Qualitative Machine Benefits
- All maintenance has been carried out annually and the machine is technically in perfect condition.
Technical Machine Benefits
- Axis travel: x 4420mm, y 2050mm, z 200mm
- Cutting feed rate: x 0 to 20m/min, y 0 to 20m/min
- Max. Rapid feed: x 80m/min, y 80m/min, z 60m/min
- Max. Worksheet weight (stand alone machine and with lst): both 1570 kg
- Table height: 940mm
- Weight with oscillator (stand alone machine): 12t
- Weight with oscillator (stand alone machine + prfo): 13,7t
- No. Of bend mirrors including collimator: 5
- Adaptive optics (optional): 1, power supply: 13 kva
Extra Information
It is no longer under power, but all maintenance has been carried out annually and the machine is technically in perfect condition. Recently it has been professionally dismantled and is ready for dispatch. All accessories are available as they were when the machine was delivered. 5 inch and 7.5 inch lens holders. A lens is also installed in each one. However, there are no pictures of this, the 5 inch lens is in the machine and the 7.5 inch is stored in a box with the documentation. Complete documentation in paper, parts list and circuit diagram also digital. With a Fanuc resonator, the complete resonator does not have to be replaced, only the turboblower, which has to be replaced every 24,000 hours and the one installed still has a remaining service life of just under 13,000 hours.
*Pueden existir diferencias entre los datos mostrados y los reales, esto debe ser confirmado por el representante de ventas.
José María García
Opciones de pago
Pago por adelantado
Financiación de activos