FANUC - ROBOCUT α-1iA IT-EDM-FAN-2000-00001
¿Tiene más preguntas? ¡Contáctenos!
José María García
+34 601 158 008
j.garcia@gindumac.com
- GINDUMAC
- Productos
- Máquinas herramienta
- ➤ Used FANUC ROBOCUT α-1iA For Sale | gindumac.com
This 5s FANUC ROBOCUT α-1iA was manufactured in 2000. It offers high-precision wire EDM cutting capabilities for molds, dies, and complex contour parts, including taper cutting. With a maximum workpiece capacity of 1000 kg and dimensions of 790 × 730 × 300 mm, this machine is designed for efficiency and precision. Consider the opportunity to buy this FANUC ROBOCUT α-1iA wire EDM machine. Contact us for further details.
Resumen
- marca: FANUC
- año: 2000
- MODELO: ROBOCUT α-1iA
- tipo de aplicación: EDM
- Ubicación: Italia
- tipo de máquina: Máquina de electroerosión por hilo
Información técnica - FANUC ROBOCUT α-1iA
Recorrido
- Número de ejes: 5
- Recorrido eje X: 520 mm
- Recorrido eje Y: 370 mm
- Recorrido eje Z: 320 mm
Información adicional
CNC control: FANUC 16i-W (5 controlled axes: X, Y, U, V, Z) or FANUC 18i-W (4 axes simultaneous: X, Y, U, V); interpolation: linear, circular; 10.4" color LCD; RS-232C
Axis travels: U ±60 mm / V ±60 mm
Workpiece capacity: Max dimensions 790 × 730 × 300 mm (option large tank: 1000 × 730 × 300 mm); max workpiece weight 1000 kg
Cutting and accuracy: Max taper ±30° over 80 mm (standard), ±45° over 40 mm (option); minimum increment 0.0001 mm; max table feed rate 900 mm/min
Wire: Diameter Ø 0.10–0.30 mm; feed speed 0–15 m/min; tension 250–2500 g; max spool weight 10 kg; wire guides tolerance 5 µm
Generator: TR1200 transistor pulse generator
Dielectric system: Demineralized water; tank capacity 530 L; filtration flow 65 (75) L/min; filtration precision 2–10 µm; paper filters (2 units)
Installation requirements: 200–220 V ±10–15%, three-phase; power consumption 11–13 kVA; compressed air 0.5 MPa, minimum 45 L/min (only with AWF unit); recommended ambient temperature 20 °C ±1 °C
*Pueden existir diferencias entre los datos mostrados y los reales, esto debe ser confirmado por el representante de ventas.
José María García
Opciones de pago
Pago por adelantado
Financiación de activos